Go to homepage
Blog Downloads

PRE-CONFIGURED VEHICLE RACKING SYSTEMS

Off-the-shelf can look so wonderful, too.

A plumber needs intelligent storage solutions, a service technician needs lots of drawers and a veterinary needs especially sturdy and robust solutions. We are where you will find it all. We have pre-configured solutions to meet your needs: ready-to-install vehicle racking that can be combined to create perfect solutions for any vehicle size or type. Tried and tested in numerous industry segments, the ALUCA Start, Work and Pro lines have everything you need in a variety of versions and feature packages. Whether for a car derived van or a full size van. The ideal organisation system for every vehicle.

We don’t have a single solution – we have three.

Start.

The entry-level model for basic requirements. Expandable as required.

Typical package for a medium-sized commercial vehicle:

Installation, left side:
  • 2x shelf trays with high rim incl. dividers 
  • 4x shelf trays with low rim incl. dividers 
  • 1990 x 1050 x 320 mm 

Installation, right side: 
  • 1x shelf tray with high rim incl. dividers 
  • 2x shelf trays with low rim incl. dividers 
  • 1010 x 950 x 320 mm

Start. 

The entry-level model for basic requirements. Expandable as required. 
Typical package for a medium-sized commercial vehicle: 
 Installation, left side: 
  • 2x shelf trays with high rim incl. dividers  
  • 4x shelf trays with low rim incl. dividers  
  • 1990 x 1050 x 320 mm  

Installation, right side:  
  • 1x shelf tray with high rim incl. dividers  
  • 2x shelf trays with low rim incl. dividers  
  • 1010 x 950 x 320 mm

Work.

The standard model with ALUCA cases and boxes. 
Typical package for a medium-sized commercial vehicle: 
Installation, left side: 
  • 1x shelf tray with high rim incl. dividers 
  • 2x shelf base with V-Boxes 
  • 2x shelf tray with low rim incl. dividers 
  • 1x long goods tray 
  • 1x rubber load restraint with 2 mounting buttons 
  • 1x bottom flap 
  • 1990 x 1200 x 320 mm 
 
Installation, right side: 
  •  1x shelf tray with high rim incl. dividers 
  • 1x shelf base with V-Boxes 
  • 1x shelf tray with low rim incl. dividers 
  • 1x bottom flap 
  • 1010 x 950 x 320 mm

Work.  

The standard model with ALUCA cases and boxes.  
Typical package for a medium-sized commercial vehicle:  
Installation, left side:  
  • 1x shelf tray with high rim incl. dividers  
  • 2x shelf base with V-Boxes  
  • 2x shelf tray with low rim incl. dividers  
  • 1x long goods tray  
  • 1x rubber load restraint with 2 mounting buttons  
  • 1x bottom flap  
  • 1990 x 1200 x 320 mm   

Installation, right side:   
  • 1x shelf tray with high rim incl. dividers  
  • 1x shelf base with V-Boxes  
  • 1x shelf tray with low rim incl. dividers  
  • 1x bottom flap  
  • 1010 x 950 x 320 mm
Pro.

The professional model as a mobile workshop for comprehensive equipment.
Typical package for a medium-sized commercial vehicle:

Installation, left side: 
  • 1x shelf tray with high rim incl. dividers 
  • 2x shelf base with V-Boxes 
  • 2x drawers (height 200 mm) 
  • 1x long goods tray 
  • 1x rubber load restraint with 2 mounting buttons 
  • 1x bottom flap 
  • 1990 x 1200 x 320 mm 

Installation, right side: 
  • 1x shelf tray with high rim 
  • 1x shelf base with V-Boxes 
  • 2x drawers (height 150 mm) 
  • 1x bottom flap 
  • 1010 x 1050 x 420 mm

Pro. 

The professional model as a mobile workshop for comprehensive equipment. 
Typical package for a medium-sized commercial vehicle: 
Installation, left side:  
  • 1x shelf tray with high rim incl. dividers  
  • 2x shelf base with V-Boxes  
  • 2x drawers (height 200 mm)  
  • 1x long goods tray  
  • 1x rubber load restraint with 2 mounting buttons  
  • 1x bottom flap  
  • 1990 x 1200 x 320 mm  

Installation, right side:  
  • 1x shelf tray with high rim  
  • 1x shelf base with V-Boxes  
  • 2x drawers (height 150 mm)  
  • 1x bottom flap  
  • 1010 x 1050 x 420 m

3, 2, 1 – go!

Loading compartment protection 

with side panel cladding and floor plate

Cases & Boxes 

can be individually combined with each other

Load securing 

with lashing rails and straps

ALUCA convinces in every respect

Our pre-configured, ready-to-install modules for spontaneous deciders are proven favourites of customers in numerous different sectors. An off-the-shelf vehicle racking system can also be a viable option. Prefabricated and ready-to-install ALUCA modules are available for various vehicle types from a range of different manufacturers

Timelessly elegant design

For a professional impression: ALUCA components impress with outstanding organisation and design.

Light

Aluminium is far lighter than other metals with comparable properties. This means maximum payload with minimum unladen weight. And, at the end of the day, cost savings.

High strength

Outstanding properties: ALUCA components made from aluminium achieve the strength of structural steel. The weight you save with aluminium increases your vehicle’s payload.

Easy to clean – low maintenance – corrosion resistance

Aluminium is an innovative material that lasts almost indefinitely. All this makes this all-rounder perfect for vehicle racking systems.

8-year warranty

On top: premium warranty on all vehicle racking system components. This is unique in the segment.

High quality and safety

Compliant with all relevant standards: ALUCA prodcuts are cash tested and certified.

Browse through our catalogue and discover the entire ALUCA product universe.

Browse the catalogue now.

Do you have any questions about our products?

We would be pleased to show you how you can cost-efficiently equip your vehicle
with a bespoke solution that fulfils your specific needs.

Get in touch now!